Testing equivalence of rationals using natural encodings

I’ve recently been spending a decent amount of my free time in self-study of Ulrich Kohlenbach’s Applied Proof Theory: Proof Interpretations and their Use in Mathematics.  As someone who has no experience with Constructivism, it is definitely challenging, but there is no better way to learn than hands-on.  Here I explore one of the topics the book mentions – encoding rational numbers into the naturals – using Haskell.

The idea is simple – take operations on $\mathbb{Q}$ and transform them into operations on $\mathbb{N}$.  We’ll use a special encoding to assign a unique $n \in \mathbb{N}$ for each $q \in \mathbb{Q}$ (yes, there are just as many natural numbers as there are rationals!).  We can then perform operations (in this exercise, equivalence tests) in the encoded set ($\mathbb{N}$) and have the results be valid in the set we care about ($\mathbb{Q}$).  Some of the steps below will seem silly, but this is just an exercise in theory.

The gist is available here.

Before we jump in, we’ll establish some prerequisite machinery for our exploration.  First, we’ll take the Nat instance from the exploration on infinite search and expand it a bit using the nomenclature in Kohlenbach.  Next, we’ll borrow the least function from Seemingly Impossible Functional Programs, slightly modified:

least p = if p 0 then 0 else 1 + least(\n -> p (1 + n))

Lastly, we’ll build the one-point compactification of $\mathbb{N}$ for use in the infinite search monad.  The premise of this monad is that by defining an infinite set, an algorithm for exhaustively searching that set is automatically generated.

natural :: Set Nat
natural = union (singleton Z) (S <$> natural)

Now we’re ready for math.

Rationals can be thought of as pairs of integers, one being the numerator $num$ and the other the denominator $den$.  There are two challenges in trying to encode this information into $\mathbb{N}$.

  1. The encoding has two inputs and one output.
  2. Rationals have sign, but the naturals have no sign.

We’ll tackle 2 first.  If $q$ is positive, then its numerator $num$ is mapped to the even natural $2|num|$ and the odd natural $2|num|-1$ otherwise.  In this way, we can encode the sign information in $q$ into the parity of a natural $n_{num}$.  The denominator $den$, on the other hand, maps to separate natural $n_{den}$ through $|den| – 1$.

Now that we have $num$ and $den$ mapping to two naturals, we’ll map the pair of naturals $(n_{num}, n_{den})$ to a single natural $q_c \in \mathbb{N}$, with $q_c$ meaning an encoded rational.  Using the Cantor pairing function

$$j(x^0, y^0) := \left\{ \begin{array}{lr} \mbox{min }u \le (x+y)^2 + 3x + y [2u = (x+y)^2 +3x + y] \mbox{ if it exists} \\ 0\mbox{ otherwise} \end{array} \right. $$

The function numden2QCode below performs this encoding, returning a natural number of type QCode representing a rational from the rational’s numerator and denominator.

numden2QCode :: Integer -> Integer -> QCode
numden2QCode num den  | (num >= 0 && den > 0) || (num <= 0 && den < 0)  = j (fromInteger $ 2*abs(num)) (fromInteger $ abs(den)-1)
                      | otherwise                                       = j (fromInteger $ 2*abs(num)-1) (fromInteger $ abs(den)-1)

j :: Nat -> Nat -> QCode
j x y = if k <= t then QCode k else QCode 0
        where   k = least (\u -> 2*u == t)
                t = (x+y)*(x+y) + 3*x + y

Testing for equivalency of rationals using QCodes might seem like a straightforward process of comparing the QCodes themselves, but one characteristic of the numden2QCode encoding we’ve developed is that $(num, den)$ (1, 2) has a different QCode than (2,4), even though these rationals are equivalent.  To test for equivalence, we’ll project the QCode back into the $n_{num}$ and $n_{den}$ pairs .

$$ j_1(z) := \mbox{min }x \le z[\exists y \le z (j(x, y) = z)] $$

$$ j_2(z) := \mbox{min }y \le z[\exists x \le z (j(x, y) = z)] $$

Here, $z$ is our rational encoding $q_c$, $j_1$ returns $n_{num}$ and $j_2$ returns $n_{den}$.  For example,

>j1 $ j 2 3
S (S Z)

>j2 $ j 3 4
S (S (S (S Z)))

Lastly, to test equivalence, we’ll extend QCode to be an instance of the Eq typeclass.  The trick here is that we need to handle odd and even $n_{num}$ cases separately, since that indicates the rational is positive or negative.  Once we back out the $n_{num}$ and $n_{den}$, we convert back to rational num/den form and equate using cross multiplication.

instance Eq QCode where
(==) n1 n2 | evenNat j1n1 && evenNat j1n2 = (j1n1/2)*(j2n2 + 1) == (j1n2/2)*(j2n1 + 1)
           | oddNat  j1n1 && oddNat  j1n2 = ((j1n1+1)/2)*(j2n2 + 1) == ((j1n2+1)/2)*(j2n1 + 1)
           | otherwise                    = False
           where j1n1 = j1 n1
                 j1n2 = j1 n2
                 j2n1 = j2 n1
                 j2n2 = j2 n2

Finally, we can equate some rationals!

print $ numden2QCode (-1) 1 == numden2QCode (-2) 2 -- True
print $ numden2QCode (-1) 1 == numden2QCode (-3) 3 -- True
print $ numden2QCode (-1) 2 == numden2QCode 2 (-4) -- True
print $ numden2QCode 1 2    == numden2QCode 2 4    -- True
print $ numden2QCode 1 2    == numden2QCode 1 3    -- False

Note that you’ll probably want to compile these into an executable like I did because they are slow otherwise.  In executable form, they are done in about 1.5 seconds.  In a future post, I’ll explore why a few changes to the Num instance for Nat reduced execution time from 88 seconds down to 1.5.

 

Leave a Reply

Your email address will not be published. Required fields are marked *

To create code blocks or other preformatted text, indent by four spaces:

    This will be displayed in a monospaced font. The first four 
    spaces will be stripped off, but all other whitespace
    will be preserved.
    
    Markdown is turned off in code blocks:
     [This is not a link](http://example.com)

To create not a block, but an inline code span, use backticks:

Here is some inline `code`.

For more help see http://daringfireball.net/projects/markdown/syntax

*
= 12 multiplied by 1